Chevrolet Equinox Service Manual: Fastener Tightening Specifications (Off Vehicle) Automatic Transmission Unit
A/Trans Case Cover Bolt | 18 | 10 | M6x1.0x30 | 12-Y | 106-lb-in |
A/Trans Fluid Pump Bolt | 1 | 3 | M6x1.0x25 | 12-Y | 106-lb-in |
A/Trans Fluid Trough Bolt | 11 | 1 | M6x1.0x25 | 12-Y | 106-lb-in |
Control Valve Body Assembly (Complete) Bolt | 19, 21 | 3 | M6x1.0x55 | 12-Y | 106-lb-in |
Control Valve Body Assembly (Complete) Bolt | 20 | 3 | M6x1.0x35 | 12-Y | 106-lb-in |
Control Valve Body Assembly (Complete) Bolt | 22 | 5 | M6x1.0x65 | 12-Y | 106-lb-in |
Control Valve Body to Case | 23 | 2 | M6x1.0x55 | 12-Y | 106-lb-in |
Control Valve Body to Case Bolt | 24 | 8 | M6x1.0x65 | 12-Y | 106-lb-in |
Control Valve Assembly (w/TCM and Body) to Case Bolt | 25 | 1 | M6x1.0x42 | 12-Y | 106-lb-in |
Control Valve Assembly (w/TCM and Body) to Case Bolt | 26 | 1 | M6x1.0x55 | 12-Y | 106-lb-in |
Control Valve Assembly (w/TCM and Body) to Case Bolt | 27 | 2 | M6x1.0x65 | 12-Y | 106-lb-in |
Control Valve Assembly (w/TCM and Body) to Case Bolt | 28 | 4 | M6x1.0x80 | 12-Y | 106-lb-in |
Control Valve Assembly (w/TCM and Body) to Case Bolt | 29 | 3 | M6x1.0x95 | 12-Y | 106-lb-in |
Control Valve Body Cover Bolt | 30 | 12 | M6x1.0x30 | 12-Y | 106-lb-in |
Control Valve Body Cover Stud | 31 | 2 | M6x1.0x30 | 12-Y | 106-lb-in |
Fluid Pressure Test Hole Plug | 12 | 1 | 1/8”–27-NPTF | 12-Y | 106-lb-in |
Fluid Level Hole Plug | 13 | 1 | 1/8”–27-NPTF | 12-Y | 106-lb-in |
Front Differential Carrier Baffle Bolt | 6 | 1 | M6x1.0x25 | 12-Y | 106-lb-in |
Front Differential Transfer Drive Gear Support Bolt | |||||
| First Pass | 5 | 9 | M8x1.25x25 | 10-Y | 89-lb-in |
| Final Pass | 5 | 9 | M8x1.25x25 | 50-degrees | |
Input Shaft Support Bolt-(Torx) | N/A | 3 | M6x1.0x50 | 12-Y | 106-lb-in |
Input Speed Sensor Bolt | 17 | 1 | M6x1.0x25 | 9-Y | 80-lb-in |
Output Speed Sensor Bolt | 14 | 1 | M6x1.0x25 | 12-Y | 106-lb-in |
Park Pawl Actuator Bracket Bolt | 10 | 2 | M6x1.0x25 | 12-Y | 106-lb-in |
Support Fluid Passage Tube (Torx) Bolt | 2 | 2 | M5x0.8x12 | 7-Y | 62-lb-in |
Support Fluid Passage Tube Bolt | 3 | 2 | M6x1.0x15 | 12-Y | 106-lb-in |
Torque Converter and Differential Housing Bolt | 8 | 14 | M8x1.25x35 | 36-Y | 27-lb-ft |
Torque Converter and Differential Housing Bolt | 9 | 3 | M8x1.25x35 | 30-Y | 22-lb-ft |
Transmission Cooler Pipe (External Torx) Stud | 15 | 2 | M8x1.25x30.5 | 12-Y | 106-lb-in |
*Reference number refers to the component callout number inDisassembled Views | |||||
Engine Flywheel Replacement Flywheel/Flexplate
Engine Flywheel ReplacementCalloutComponent NamePreliminary ProcedureRemove the transmission. Refer toTransmission Replacement.Special ToolsEN-43653Engine Flywheel Holding Tool.For equivalent regional ...
Fastener Tightening Specifications (Off Vehicle) Automatic Transmission Unit
Fastener Tightening SpecificationsApplicationRef No.*QuantitySizeSpecificationMetricEnglishA/Trans Auxiliary Fluid Pump Outlet Bolt-(HybridModels)3504—22-Y16-lb-ftA/Trans Auxiliary Fluid Pump Bolt-( ...
Other materials:
Hood Adjustment Panels
Hood AdjustmentCalloutComponent Name1HoodCaution:Refer toFastener Caution.ProcedureLoosen the hood hinge reinforcementnuts-(Qty:-4).Adjust the hood in order to obtain an even gap on both sidesbetween the hood and the fenders, the headlamps and the frontbumper fascia and so that the hood is flush wit ...
