Fastener Tightening Specifications
Application
Specification
Metric
English
Lower Control Arm Bolt | 160-Y | 118-lb-ft |
Lower Control Arm to Support Assembly Bolt | 125-Y | 92-lb-ft |
Lower Shock Absorber Bolt | 110-Y | 81-lb-ft |
Park Brake Routing Bolt | 12-Y | 106-lb-in |
Rear Brake Hose Bracket Nut/Bolt | 12-Y | 106-lb-in |
Spring Jounce Bumper | 58-Y | 43-lb-ft |
Stabilizer Link to Lower Control Arm Nut | 15-Y | 11-lb-ft |
Stabilizer Link to Stabilizer Shaft Nut | 95-Y | 70-lb-ft |
Stabilizer Shaft Clamp Bolt | 70-Y | 52-lb-ft |
Support to Body Bolt | 170-Y | 125-lb-ft |
Toe Link Bolt | 160-Y | 118-lb-ft |
Toe Link to Knuckle Bolt | 160-Y | 118-lb-ft |
Toe Link to Support Bolt | 160-Y | 118-lb-ft |
Trailing Arm Bolt | 110-Y | 81-lb-ft |
Trailing Arm Bracket to Body Bolt | 110-Y | 81-lb-ft |
Trailing Arm Bracket to Knuckle Bolt | 150-Y | 110-lb-ft |
Trailing Arm Bushing Bolt | 160-Y | 118-lb-ft |
Upper Control Arm to Knuckle Bolt | 160-Y | 118-lb-ft |
Upper Control Arm to Support Bolt | 164-Y | 121-lb-ft |
Upper Shock Bolt | 110-Y | 81-lb-ft |
Wheel Bearing/Hub Bolt | 70-Y | 52-lb-ft |
Wheel Drive Shaft Nut– AWD | 205-Y | 151-lb-ft |
Diagnostic Repair Verification
Note:After a repair has been made, some DTCs require the ignition to be turned OFF thenback ON before the scan tool function will clear the DTC.Ignition OFF.Install any components or connectors that have been removed or replaced during diagnosis.Perform any adjustment, programming or setup procedure ...