For replacement of any adhesive-installed window, use the full cut method only.
Use an adhesive that is approved by GM, Specification GMW-15672.
Use these materials based on specific manufacturer. Do NOT intermix primers or adhesivesfrom one manufacturer to another.
Always follow the system manufacturers instructions for application, handling, andcuring.
Glass & Windows
Special ToolsSecondary Air Injection Check Valve Cleaning and Inspection Emissions Air Injection
Inspect the secondary air injection-(SAI) checkvalve for the following:Damage to the SAI check valve feed pipefitting-(1)Damage to the SAI check valve mounting boltholes-(2)Damage to the SAI check valve gasket sealingsurface-(3)Damage to the SAI check valve inletport-(4)Replace the SAI check valve a ...