Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: Vehicle Personalization

Use the audio system controls to access the personalization menus for customizingvehicle features.

The following are all possible personalization features. Depending on the vehicle,some may not be available.

CONFIG (Configuration)

Press to access the Configuration Settings Menu.

MENU/SEL Knob

Press the center of this knob to enter the menus and select menu items. Turn the knobto scroll through the menus.

E BACK

Press to exit or move backward in a menu.

Entering the Personalization Menus

Turn the infotainment system on and press the CONFIG button to access the Configuration Settings menu.Turn the MENU/SEL knob to highlight Vehicle Settings.Press the center of the MENU/SEL knob to select the Vehicle Settings menu.

The following list of menu items may be available:

Climate and Air QualityComfort and ConvenienceCollision/Detection SystemsLanguagesLightingPower Door LocksRemote Lock/Unlock/StartReturn to Factory Settings

Each of the menus is detailed in the following information.

Climate and Air Quality

Select and the following may display:

Auto Fan SpeedAir Conditioning ModeRemote Start Auto Heat SeatsAuto DefogAuto Rear Defog

Auto Fan Speed

This selection is available on vehicles with the Automatic Climate Control System.Choose from the following blower speed settings:

High

Increased speed.

Low

Reduced speed.

Normal

Moderate speed.

Air Conditioning Mode

This will allow you to select whether or not the air conditioning comes on automaticallythe next time the vehicle is started. On means that the air conditioning will be onat start up, regardless of whether it was on or off the last time the vehicle wasturned off. Off means the air conditioning will be off at the next start up, regardlessof whether it was on or off the last time the vehicle was turned off. Last Settingmeans that whenthe vehicle is started, the air conditioning will resume whichever setting it wasat the last time the vehicle was turned off.

Select On, Off, or Last Setting.

Remote Start Auto Heat Seats

When on, this feature will turn the heated seats on when using remote start on colddays.

Select On or Off.

Auto Defog

When turned on and high humidity is detected, the climate control system may adjustto outside air supply and turn on the air conditioner or the heater. The fan speedmay slightly increase to help prevent fogging. When high humidity is no longer detected,the system will return to its prior operation.

Select On or Off.

Auto Rear Defog

When on, this feature turns on the rear defogger at vehicle start when the interiortemperature is cold and fog is likely. The auto rear defog function can be disabledby pressing 1. When off, the feature can be turned on by pressing 1. See “Rear Window Defogger” underClimate Control SystemsorAutomatic Climate Control System.

Select On or Off.

Comfort and Convenience

Select and the following may display:

Easy Exit Driver SeatChime VolumeReverse Tilt MirrorMemory Remote Recall

Easy Exit Driver Seat

This feature automatically recalls the current driver’s previously stored EXIT buttonposition when exiting the vehicle. See the “Easy Exit Driver Seat” underPower Seat Adjustment.

Select On or Off.

Chime Volume

This allows the selection of the chime volume level.

Select Normal or High.

Reverse Tilt Mirror

When on, both the driver and passenger mirrors will tilt downward when the vehicleis shifted to R (Reverse) to improve visibility of the ground near the rear wheels.They will return to their previous driving position when the vehicle is shifted outof R (Reverse), the ignition is turned to OFF, or the vehicle is left in R (Reverse).SeeReverse Tilt Mirrors.

Select On or Off.

Memory Remote Recall

This feature automatically recalls the current driver’s previously stored 1 or 2 buttonpositions when entering the vehicle. See “Memory Remote Recall” underMemory Seats.

Select On or Off.

Collision/Detection Systems

Select and the following may display:

Park Assist

Park Assist

This allows the Ultrasonic Parking Assist feature to be turned on or off.

Select On, Off, or On with Tow Bar Attached.

SeeUltrasonic Parking Assist.

Languages

Select Languages, then select from the available language(s).

Lighting

Select and the following may display:

Vehicle Locator LightsExit Lighting

Vehicle Locator Lights

This allows the vehicle locator lights to be turned on or off.

Select On or Off.

Exit Lighting

This allows the selection of how long the exterior lamps stay on when leaving thevehicle when it is dark outside.

Select Off, 30-Seconds, 1-Minute, or 2-Minutes.

Power Door Locks

Select and the following may display:

Unlocked Door Anti Lock OutAuto Door UnlockDelayed Door Lock

Unlocked Door Anti Lock Out

When on, this feature will keep the driver door from locking when the door is open.If off is selected, the Delayed Door Lock menu will be available.

Select On or Off.

Auto Door Unlock

This allows selection of which of the doors will automatically unlock when the vehicleis shifted into P-(Park).

Select All Doors, Driver Door, or Off.

Delayed Door Lock

When on, this feature will delay the locking of the doors. If you want to overridethe delay you can press the power door lock on the instrument panel.

Select On or Off.

Remote Lock/Unlock/Start

Select and the following may display:

Remote Unlock Light FeedbackRemote Lock FeedbackRemote Door Unlock

Remote Unlock Light Feedback

When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter.

Select Flash Lights or Off.

Remote Lock Feedback

This allows selection of what type of feedback is given when unlocking the vehiclewith the RKE transmitter.

Select Lights and Horn, Lights Only, Horn Only, or Off.

Remote Door Unlock

This allows selection of which doors will unlock when pressing the unlock button onthe RKE transmitter.

Select All Doors or Driver Door.

Return to Factory Settings

Select Return to Factory Settings to return all of the vehicle personalization tothe default settings.

Select Yes or On.

Memory Seat Control Module Programming and Setup Seating Position
The seat memory control module must be programmed with theproper calibration software. The module stores and utilizes thisinformation however if it is not properly configured with thecorrect calibrati ...

Vehicle - General
...

Other materials:

Transfer Case Disassemble 4WD Transfer Case
Table 1: Housing O-Ring, Vent Assembly, Drain and Fill Plug RemovalTable 2: Intermediate Drive Shaft RemovalTable 3: Rear Output Shaft Housing RemovalTable 4: Right Transfer Case, Input and Output Drive Shaft RemovalTable 5: Rear Output Shaft Housing DisassemblyTable 6: Intermediate Drive Shaft Disa ...

© 2017-2024 Copyright www.cequinox.com