Chevrolet Equinox Owners Manual: Cleaning Exterior Lamps/ Lenses, Emblems, Decals, and Stripes
Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals, and stripes.
Follow instructions under "Washing the Vehicle" previously in this section.
Lamp covers are made of plastic, and some have a UV protective coating. Do not clean or wipe them when dry.
Do not use any of the following on lamp covers:
- Abrasive or caustic agents.
- Washer fluids and other cleaning agents in higher concentrations than suggested by the manufacturer.
- Solvents, alcohols, fuels, or other harsh cleaners.
- Ice scrapers or other hard items.
- Aftermarket appearance caps or covers while the lamps are illuminated, due to excessive heat generated.
| Caution Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty. |
| Caution Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only. |
Air Intakes
Clear debris from the air intakes, between the hood and windshield, when washing the vehicle.
Protecting Exterior Bright Metal
Moldings
Caution
Failure to clean and protect the
bright metal moldings can result
in a hazy white finish or pitting.
This damage would not be
covered by the vehicle warranty.
The b ...
Shutter System
The vehicle may have a shutter
system designed to help increase
fuel economy. Keep the shutter
system clean for proper operation.
Windshield and Wiper Blades
Clean the outside of the windshie ...
Other materials:
Crankshaft Position System Variation Learn Engine Block Cylinder Block Crankshaft
Note:The Crankshaft Position System Variation Learn procedure is also required when thefollowing service procedures have been performed, regardless of whether DTC-P0315is set:An engine replacementA engine control module (ECM) or body control module (BCM) replacementA crankshaft balancer replacementA ...
