Caution:Replacement components must be the correct part number forthe application. Components requiring the use of the thread lockingcompound, lubricants, corrosion inhibitors, or sealants areidentified in the service procedure. Some replacement componentsmay come with these coatings already applied. Do not use thesecoatings on components unless specified. These coatings can affectthe final torque, which may affect the operation of the component.Use the correct torque specification when installing components inorder to avoid damage.
Clearcoat/Ultraviolet Screeners Caution
Compressor Hose Clearance to the Exhaust Gas Circulation Pipe CautionStarter Replacement (LFX) Starting System Starter
Removal ProcedureTurn OFF the ignition.Disconnect the battery negative cable. Refer toBattery Negative Cable Disconnection and Connection.Remove the heat shield (2) from the starter.Disconnect the knock sensor connector.Disconnect and remove the bank 1 sensor 2 oxygen sensor after the left catalytic ...