Operating Conditions: Ignition ON | ||
Base Model Part Number | Varies, 8 Digit Number | The scan tool displays the part number of the PPS module which is stored in non volatilememory. |
Battery Voltage | Volts | The scan tool will display battery voltage. |
Calibration Part Number | Varies, 8 Digit Number | The scan tool displays the part number of the calibration file in the PPS module. |
End Model Part Number | Varies, 8 Digit Number | The scan tool displays the part number of the PPS module in production. |
Manufacturer's Traceability Number | Varies, 16 Digit Number | The scan tool displays the 16 digit traceability number in the PPS module. |
Passenger Classification | Empty Seat | The scan tool displays Unknown, Calibration Mode, Empty Seat, Small Occupant Type1, Small Occupant Type 2, Small Occupant Type 3, Small Occupant Type 4, Large OccupantType 1, Large Occupant Type 2, Large Occupant Type 3, Large Occupant Type 4, ModuleSetup, Not Available, Child Seat Facing Rearward, Child Seat Facing Forward, ChildSeat Facing Unknown Direction. This is the state of what occupies the passenger seat,as monitored bythe passenger presence system. |
Passenger Presence Module Primary Key | Hex Value | The scan tool indicates the primary key Hex value. |
Passenger Presence System Reporting DTC(s) | Yes/No | The PPS module will report if there are DTCs set in the passenger presence module. |
Passenger Seat Occupancy Status | Empty Seat | The scan tool displays Undefined, Empty Seat, Occupied, or Invalid. This is the stateof the passenger seat if it is occupied or empty and monitored by the passenger presencesystem. |
Power Mode | Off / Accessory / Run / Crank Request | The scan tool will display the power mode of the vehicle. |
Primary Key Status | Valid/Invalid | The scan tool displays Valid if the primary key matches what is stored to memory inthe PPS module. |
Received Primary Key | Hex Value | The scan tool displays a Hex value indicating the PPS module received primary keydata. |
Software Part Number | Varies, 8 Digit Number | The scan tool displays the software part number in the PPS module. |
Engine Mount Inspection Engine Block Engine Mounts
Note:Before replacing any engine mount due to suspected fluidloss, verify that the source of the fluid is the engine mount, notthe engine or accessories.Install the engine support fixture. Refer toEngine Support Fixture.Observe the engine mount while raising the engine. Raisingthe engine removes the ...