Metric wheel/nuts and bolts are identified in the followingway:
The wheel/nut has the word Metric stamped on the face.The letter M is stamped on the end of the wheel bolt.The thread sizes of metric wheel/nuts and the bolts areindicated by the following example: M12 x 1.5.
M = Metric12 = Diameter in millimeters1.5 = Millimeters gap per threadWater Pump and Balance Shaft Chain Tensioner Replacement Engine Block Cylinder Block Balance Shaft
Water Pump and Balance Shaft Chain Tensioner ReplacementCalloutComponent NamePreliminary ProcedureRemove the engine front cover. Refer toEngine Front Cover Replacement.1Water Pump and Balancer Shaft Chain Tensioner Fastener (Qty:-2)Caution:Refer toFastener Caution.ProcedureRotate the tensioner plung ...