Chevrolet Equinox Service Manual: Tire Dismounting and Mounting (Tire Inflation) Wheels

Chevrolet Equinox Service Manual / Chassis / Wheels/Tires / Tire Dismounting and Mounting (Tire Inflation) Wheels

Make sure beads of tire are fully seated.Tires are to be inflated to vehicle tire placard spec forproduction assemblies and to placard spec provided with accessorywheels.

Rear Camber Adjustment Wheels

Loosen the upper control arm-to-frame fastener enough toallow movement.Note:The frame of the vehicle is slotted, turning the cam nut willmove the camber in to the designated location.Rotate the upper ...

Tire Dismounting and Mounting (Match Mounting) Wheels

Match mounting is required on any wheel/tire assembly notwithin RFV specification.Important:If a wheel/tire assembly is not within the RFV specificationafter match mounting, the tire must be returned ...

Other materials:

Rear Wheel Drive Shaft Inner Joint and Boot Replacement Wheels
Special ToolsJ-35910Drive Axle Boot Clamp PliersNote:The inner Constant Velocity Joint is not serviced separately.If the CV joint is found to have excessive wear or damaged, replacethe wheel drive shaft as an assembly.Disassemble ProcedureRemove the wheel drive shaft. Refer toRear Wheel Drive Shaft ...