Chevrolet Equinox Service Manual: Tools and Equipment
Special tools are listed and illustrated throughout thissection, with a complete listing at the end of the section. Thesetools, or their equivalents, are designed to quickly and safelyaccomplish the operations for which they are intended. The use ofthese special tools also minimize possible damage to enginecomponents. Some precision measuring tools are required forinspection of certain critical components. Torque wrenches and atorque angle meter are necessary for the proper tightening ofvarious fasteners.To properly service the engine assembly, the following itemsshould be readily available:Approved eye protection and safety glovesA clean, well-lit, work areaA suitable component cleaning tankA compressed air supplyTrays or storage containers to keep components and fastenersorganizedAn adequate set of hand toolsApproved engine repair standAn approved engine lifting device that adequately supportsthe weight of the components
Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Sealant TypesNote:The correct sealant and amount of sealant must be used in theproper location to prevent oil leaks, coolant leaks, or theloosening of the fasteners. DO NOT interchange the sealants. U ...
Tools and Equipment
Special tools are listed and illustrated throughout thissection with a complete listing at the end of the section. Thesetools, or their equivalents, are specially designed to quickly andsafely accompl ...
Other materials:
Propeller Shaft Description and Operation Driveshafts Propeller Shaft Assembly
The propeller shaft assembly is a 2-piece design.The front shaft consists of a plunging A-type constantvelocity joint at the front and a universal joint and yoke at therear.The rear shaft consists of a center bearing and a centeryoke, which are pressed onto the rear half of the propshaft andretained ...
